Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Ether channel configuration sync issue

Hi,

We are facing the Ether Channel configuration sync issue as " Everytime when there is some issue with Etherchannel modules then we need to re-configure the Ether configuration again even if we either reset the problematic module or insert new module on same slot "

Common of all L3 switches is the module Part code: WS-X6748-GE-TX

Also attaching the show version, show module for these Switches. Suggest us if there is any bug impact with the current IOS running with these Switches or we have some Hardware issue with specific module part.

Regards,

Ashutosh         

1 REPLY

Ether channel configuration sync issue

Could you provide the configuration of the etherchannels in question?

173
Views
0
Helpful
1
Replies