Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Bronze

etherchannel and pruning

Hi everybody

Let say we have following network

Sw1 f0/1------trunk---f0/1-sw2-----rest of switched network.

       f0/2--blocked---f0/2

VTP pruning is enabled in the domain, as result sw2 is pruning vlan4 on f0/1 trunk.   We want to form etherchannel between sw1 and sw2  over ports f0/1 and f0/2( the blocked port).  Does pruning vlan 4 on sw2 affect the formation of etherchannel?

thanks

1 ACCEPTED SOLUTION

Accepted Solutions

etherchannel and pruning

In short - no it does not.  Pruning is not directly linked to ether-channels.

HTH>

2 REPLIES

etherchannel and pruning

In short - no it does not.  Pruning is not directly linked to ether-channels.

HTH>

New Member

etherchannel and pruning

No.. it should not.. but ensure that you have identical configuration on all  the interfaces which are participating in ether channel on all switches.

-Vijay

215
Views
0
Helpful
2
Replies
CreatePlease login to create content