Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Etherchannel Setup

Has anyone seen this log message before

when attempting to configure a 2-port layer 3 EtherChannel on the same line card (WS-X6148-GE-TX), the following syslog messages were generated.

Aug 12 16:15:58.497 EST: %PM-SPSTBY-3-INTERNALERROR: Port Manager Internal Software Error (is_unallocated: ../const/native-sp/pm_sp_vlan.c: 952: pm_get_standby_vlan)

-Traceback= 40F9BDC4 40F9BFAC 40F5F490 40F9C480 40F9C4E8 40F7D614 40F7D6A8 40F7E158 40F7E3E8 40F7E814 40BDE940 40BE67CC 40ED83FC 40ED6894 40F9EFE0 40FA01AC

Aug 12 16:15:58.497 EST: SPSTBY: pm_get_standby_vlan:Cannot allocate VLAN for GigabitEthernet2/48 VLAN 1026 is use by NDE 0

Aug 12 16:15:58.497 EST: %PM-SPSTBY-4-INT_VLAN_NOTAVAIL: Failed to allocate internal VLAN in Port Manager

The etherchannel is created ok and seems fully functional, is the log entry anything to worry about.

4 REPLIES
Hall of Fame Super Gold

Re: Etherchannel Setup

Traceback can only lead to one of two things:  An IOS bug or a hardware failure.  I'm suspecting you have a cosmetic bug.

New Member

Re: Etherchannel Setup

Thanks for you input

I will explore the bug option further

Cisco Employee

Re: Etherchannel Setup

Hello,

What is the code version you are running?

Regards,

NT

New Member

Re: Etherchannel Setup

Thanks for you input

Cisco IOS Software, s3223_rp Software (s3223_rp-ADVIPSERVICESK9_WAN-M), Version 12.2(33)SXH5, RELEASE SOFTWARE (fc1)

653
Views
0
Helpful
4
Replies