Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Ethernet card

Hi all,

I need an ethernet card with 2 ports

we have the card with 1 port WIC-1ENET=

If there is a card with 2 port let me have the part number

Note: I do not need a switchport. I neet ethernet port.

Thanks

Eric

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Ethernet card

If i understand you need a routed ethernt port.

For 2811 you can use the 1-port HWIC-1FE

2 port is not supported on the 2811

http://www.cisco.com/en/US/products/hw/modules/ps2641/products_module_installation_guide_chapter09186a008068dde6.html#wp1049748

For 2611 check this link

http://www.cisco.com/en/US/products/hw/routers/ps274/products_data_sheet09186a0080091b89.html

HTH, rate if it does

Narayan

3 REPLIES

Re: Ethernet card

which platform are you looking this for?

New Member

Re: Ethernet card

i need it for 2611 or 2811 series router

Thaks

Re: Ethernet card

If i understand you need a routed ethernt port.

For 2811 you can use the 1-port HWIC-1FE

2 port is not supported on the 2811

http://www.cisco.com/en/US/products/hw/modules/ps2641/products_module_installation_guide_chapter09186a008068dde6.html#wp1049748

For 2611 check this link

http://www.cisco.com/en/US/products/hw/routers/ps274/products_data_sheet09186a0080091b89.html

HTH, rate if it does

Narayan

95
Views
0
Helpful
3
Replies