07-04-2007 02:29 AM - edited 03-05-2019 05:07 PM
Hi all,
I need an ethernet card with 2 ports
we have the card with 1 port WIC-1ENET=
If there is a card with 2 port let me have the part number
Note: I do not need a switchport. I neet ethernet port.
Thanks
Eric
Solved! Go to Solution.
07-04-2007 03:12 AM
If i understand you need a routed ethernt port.
For 2811 you can use the 1-port HWIC-1FE
2 port is not supported on the 2811
For 2611 check this link
http://www.cisco.com/en/US/products/hw/routers/ps274/products_data_sheet09186a0080091b89.html
HTH, rate if it does
Narayan
07-04-2007 02:31 AM
which platform are you looking this for?
07-04-2007 02:32 AM
i need it for 2611 or 2811 series router
Thaks
07-04-2007 03:12 AM
If i understand you need a routed ethernt port.
For 2811 you can use the 1-port HWIC-1FE
2 port is not supported on the 2811
For 2611 check this link
http://www.cisco.com/en/US/products/hw/routers/ps274/products_data_sheet09186a0080091b89.html
HTH, rate if it does
Narayan
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide