Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

EtherSwitch NME-16ES-1G

I have a 2821 router that has a EtherSwitch NME-16ES-1G installed in it. I am not the greatest network person. My goaled is to us the vlans that I have configured on all my 3560 switches on the EtherSwitch. How can I get them to use the gig 1/0 that has a static IP and the gig 1/0/2 interface for routing?

1 REPLY
Bronze

Re: EtherSwitch NME-16ES-1G

1) To create VLANs use the VLAN database mode.

Router1#vlan database

Router1(vlan)#vlan 10

VLAN 10 added:

Name: VLAN0010

Router1(vlan)#vlan 50

VLAN 50 added:

Name: VLAN0050

Router1(vlan)#exit

APPLY completed.

Exiting....

Router1#

2) To map an interface to a VLAN,

Router1(config)#interface fastEthernet 1/2

Router1(config-if)#switchport mode access

Router1(config-if)#switchport access vlan 10

Router1(config-if)#exit

3) Add a static route pointing to the default gateway (or the interface towards the gateway - Gig 1/0/2).

221
Views
0
Helpful
1
Replies