Is it possible to exclude a vlan from a vtp domain? I would like to add a vlan to the vtp server switch and NOT have it propagate to all client switches.
Is this A VLAN in a number of VLANs or only ONE and only VLAN? If you have only ONE VLAN then go Transparent mode. If you have a group of VLANs and you just want to exclude one then in your allowed Trunks, just deny that VLAN you don't want to propagate.
[toc:faq]The ProblemOn traditional switches whenever we have a trunk
interface we use the VLAN tag to demultiplex the VLANs. The switch needs
to determine which MAC Address table to look in for a forwarding
decision. To do this we require the switch to do...
[toc:faq]Introduction:Netdr is a tool available on a RSP720, Sup720 or
Sup32 that allows one to capture packets on the RP or SP inband. The
netdr command can be used to capture both Tx and Rx packets in the
software switching path. This is not a substitut...
IntroductionOSPF, being a link-state protocol, allows for every router
in the network to know of every link and OSPF speaker in the entire
network. From this picture each router independently runs the Shortest
Path First (SPF) algorithm to determine the b...