Facing slowness problem in inter and intra vlan network.
We are using 2 Nexus 5010 switches and 10 N2248TP fex in our network. From last couple of days we are facing slowness of speed while transferring the data between servers of same vlan and other vlan also. we just upgraded the NX-OS of the N5K, from 4.2 to 5.0. I also check the reliability at both ends N5K and core switch end. Reliabilty at N5K is 255, but at 6500 end it is varying.
One of my friend also suggest to me capture the traffic on the port of N5K using packet sniffer but as far as i know it only support from port number 1 to 8 of N5K, but due to some problem we are not able to do that.
As you all know the ports are gig interfaces, I also checked the traffic on interfaces and it is showing in KBs, which is I think normal.
Re: Facing slowness problem in inter and intra vlan network.
If the reliability is less than 255 I would concentrate your efforts there. Usually it will end up being a link issue of some type . On the 6500 it means the input side is having issues if reliability is less than 255 . Do a "show int count errors" on the 6500 and see if you have any kind of errors on that port.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.