Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Failover VPN issues with 2821 and asa 5510

Currently I have a network that looks like this:

ASA5510 - - - Internet - - - ASA5510

     |                                             |

EIGRP                                 EIGRP

     |                                              |

2821 -----------MPLS----------1841

                         BGP

The MPLS connection is currently down, I'm trying to run a failover Site-to-Site VPN over the internet. All of the examples I've read have both connections involved in the failover coming out of one device. Since I'm not working that way, what is going to be the best way to failover? Do I need to set up some sort of IP SLA in the config? Or can I somehow weight routes in EIGRP in a way that the connection will failover from Internet to MPLS when the MPLS goes down and vice versa when the MPLS connection comes back up?

This post has a very similar situation, but the instructions weren't detailed enough for me to follow: https://supportforums.cisco.com/thread/2006404

Any help is appreciated as these 2 sites are currently cut off from one another.

Thanks in advance.

2 REPLIES
New Member

Failover VPN issues with 2821 and asa 5510

Researching EIGRP failover and the command "

set ip next-hop verify-availability". Hopefully this leads somewhere.

New Member

Failover VPN issues with 2821 and asa 5510

Researching that command based off of this thread: https://supportforums.cisco.com/thread/205665

359
Views
0
Helpful
2
Replies
CreatePlease to create content