We are facing an issue on cisco 3750 switch fan issue, showing message on GUI that fan is faulty. Please find below CLI output:
3750x#sh env all FAN 1 is OK FAN 2 is OK FAN PS-1 is OK FAN PS-2 is NOT PRESENT SYSTEM TEMPERATURE is OK System Temperature Value: 22 Degree Celsius System Temperature State: GREEN Yellow Threshold : 46 Degree Celsius Red Threshold : 60 Degree Celsius SW PID Serial# Status Sys Pwr PoE Pwr Watts --- ------------------ ---------- --------------- ------- ------- ----- 1A C3KX-PWR-350WAC LIT15150G3C OK Good Good 350/0 1B Not Present
My concern is that why one fan is showing as faulty as no message appear on console. Is it required to replace the power supply or install the FAN PS-2????
We are pleased to announce availability of Beta software for 16.6.3.
16.6.3 will be the second rebuild on the 16.6 release train targeted
towards Catalyst 9500/9400/9300/3850/3650 switching platforms. We are
looking for early feedback from customers befor...
Introduction Featured Speakers Luis Espejel is the Telecommunications
Manager of IENova, an Oil & Gas company. Currently he works with Cisco
IOS® and Cisco IOS XE platforms, and NX to some extent. He has also
worked as a Senior Engineer with the Routing P...
In this session you can learn more about Layer 3 multicast and the best
practices to identify possible threats and take security measures. It
provides an overview of basic multicast, the best security practices for
use of this technology, and recommendati...