I need to implement a small network comprising 6 GigE switches / 20 hosts in which real time data shall be distributed; low bandwidth but low latency/jitter and high availability needed. I would like to adopt a meshed ring network to provide resilience but in the event of physical link or equipment failure would require the topology change time to be in the order of 10-100 ms.
Are any spanning tree protocols capable of providing (guaranteeing) such a short time? Or what alternatives are there to achieve this?
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...