Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

FC Port Channel to Fabric Interconnect

Hi All

I am trying to create a port channel from a mds 9148 to a FI 6298 but not having much success.

here is the config on the mds

MDS 9148

feature npiv

feature fport-channel-trunk

interface port-channel 47

  switchport mode F

  switchport trunk allowed vsan 45

  switchport rate-mode dedicated

  switchport trunk mode auto

vsan database

  vsan 45 interface port-channel 47

  vsan 45 interface fc1/13

  vsan 45 interface fc1/14

                  

interface fc1/47
  switchport trunk mode auto
  port-license acquire
  channel-group 47 force
  no shutdown

interface fc1/48
  switchport trunk mode auto
  port-license acquire
  channel-group 47 force
  no shutdown

dub-mds-9148-b(config-if)# sh int port-channel 47

port-channel 47 is down (No operational members)

    Hardware is Fibre Channel

    Port WWN is 24:2f:54:7f:ee:a7:cd:c8

    Admin port mode is F, trunk mode is auto

    snmp link state traps are enabled

    Port vsan is 45

    5 minutes input rate 1248 bits/sec, 156 bytes/sec, 0 frames/sec

    5 minutes output rate 296 bits/sec, 37 bytes/sec, 0 frames/sec

      2364 frames input, 242148 bytes

        0 discards, 0 errors

        0 CRC,  0 unknown class

        0 too long, 0 too short

      2079 frames output, 567212 bytes

        0 discards, 0 errors

      81 input OLS, 28 LRR, 26 NOS, 0 loop inits

      78 output OLS, 45 LRR, 54 NOS, 28 loop inits

    Member[1] : fc1/47

    Member[2] : fc1/48

Fabric Interconect

I sed UCSM so just create a FC Port Channel with the 2 interfaces and gave it the id of 47

any help is greatly appreciated

191
Views
0
Helpful
0
Replies
CreatePlease login to create content