FCoE Native VLAN Configuration

[lomonaco]

Hi

One question about FCoE Configuration

Is better to permit the Native VLAN (FIP VLAN) in the allowed trunk vlans or just left it in the native vlan configuration

Here the two choices showing my doubt

VLAN 1197

name FIP_VLAN

!

VLAN 1198

name FCOE_VLAN

fcoe vsan XX

01)

interface EthernetX/X

switchport

switchport mode trunk

switchport trunk native vlan 1197

switchport trunk allowed vlan 1197,1198

spanning-tree port type edge trunk

or

02)

interface EthernetX/X

switchport

switchport mode trunk

switchport trunk native vlan 1197

switchport trunk allowed vlan 1198

spanning-tree port type edge trunk

[Reza Sharifi · Accepted solution]

Hi,

Usually when you add it to the trunk as native, you don't to add again.  So, option-2

HTH