Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

FETs work for 7700 to 7700?

I need cheaper alternatives to connect the VPC peer links between my 7706 chassis (running F348XP-23 cards each).    Twinax is a bit on the thick end and hard to manage space so I wanted to check if FET modules can be used on both ends of 7706 or are the FETs ONLY for Nexus 7Ks/5Ks to 2Ks only?  Or are there other alternatives?

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

FETs work for 7700 to 7700?

FET's only supported from N2K - Parent switch could be 7K/5K. You cannot use FET between 77K and 7K.

You would either do the Twinax or Fiber connectivity with SFP-10G-SR.

2 REPLIES
Cisco Employee

FETs work for 7700 to 7700?

FET's only supported from N2K - Parent switch could be 7K/5K. You cannot use FET between 77K and 7K.

You would either do the Twinax or Fiber connectivity with SFP-10G-SR.

New Member

FETs work for 7700 to 7700?

Thanks, Amit.   That's what I thought.

128
Views
0
Helpful
2
Replies
CreatePlease login to create content