%FIB-4-FIBCBLK: Missing cef table

[rdeangel]

Is anybody familiar with this message:

%FIB-4-FIBCBLK: Missing cef table for tableid 65535 during CEF samecable event

The router keeps reporting this constantly.

If you would also happen to know how to fix this it would be great thanks.

Thanks

Rocco

[Giuseppe Larosa]

Hello Rocco,

the error message decoder provides the following feedback:

2. %FIB-4-FIBCBLK: Missing cef table for tableid [dec] during [chars] event

An internal software error has occurred.

Recommended Action: Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/action.do?hdnAction=searchBugs. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://www.cisco.com/cgi-bin/front.x/case_tools/caseOpen.pl, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

And the tool suggests also the following link for CEF error messages troubleshooting:

https://www.cisco.com/en/US/products/hw/routers/ps359/products_tech_note09186a0080110d68.shtml

according to the document you may be hitting the following bugs:

Cisco bug IDs CSCsg03483 and CSCee26209 d

Hope to help

Giuseppe

[rdeangel]

Thank for the links Giuseppe,

I found the following for a similar errors:

-----------

CSCee26209 Bug Details

%FIB-4-FIBCBLK: Missing cef table for tableid

Symptoms: When removing "ip vrf" from the configuration, the following message

is printed:

%FIB-4-FIBCBLK: Missing cef table for tableid 1 during CEF table change event.

This is also triggered when configuring a NPE-G1 interface with a vrf.

Conditions: Simple configuration with no routing protocols running.

Workaround: not known. But there is no expected impact which should

be expected from those error messages.

---------

I don't think there is a workaround for my issue either.

However this error seems to cause no real effect.

Thanks

Regards

Rocco

[Harold Ritter]

Rocco,

You might also want to check CSCsx53968.

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsx53968

Regards