Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

firewall config for voice

If i want to call a phone from the outside of my firewall to the inside, do i need to allow that traffic in, via an access list, what would the access list look like, would it be rtp, etc allowed to go just to the call manager, or phone to phone ?

2 REPLIES

Re: firewall config for voice

Carl,

It depends on what the phones from the outside that need to register with the CallManager at the inside or not. If so,Those phones need to register with the CallManager. May need to request the dhcp and connect to the tftp server first!. Then you allow the rtp packets to be used when ip phones talking with each other.

This is all ports you need to know

http://www.cisco.com/univercd/cc/td/doc/product/voice/c_callmg/sec_vir/udp_tcp/index.htm

HTH

Thot

New Member

Re: firewall config for voice

if its a seperate call manager on the outside, what do i need to let in from my outside interface ?

177
Views
0
Helpful
2
Replies