Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Flash appears to be full

My device has 256 MB of flash however when I issue the show flash command it appears to be full

System CompactFlash directory:

File Length Name/status

1 39296912 c3725-adventerprisek9_ivs-mz.124-23.bin

2 900 vlan.dat

[256901116 bytes used, 0 available, 256901116 total]

250880K bytes of ATA System CompactFlash (Read/Write)

Is this normal and can I correct it?

2 REPLIES
Purple

Re: Flash appears to be full

Do a "dir flash: and see whats in there . Does it only show the 1 image ? If so then do a squeeze command to recover the space . Someone probably deleted previous files and did not squeeze the flash .

New Member

Re: Flash appears to be full

It seems that if I boot my IOS from flash then all the space appears to be full, however if I boot from slot0, then both flash and slot0 appear fine. I am wondering it is something with the IOS as when I boot from flash squeeze does not no anything.

108
Views
0
Helpful
2
Replies
CreatePlease login to create content