Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

flash got erased

By mistake flash got erased on 2950G Switch. How to load the flash again on the switch.

2 REPLIES

Re: flash got erased

Hall of Fame Super Silver

Re: flash got erased

EP

It is not clear from your post whether you have a copy of the image file backed up somewhere. If you do have a back up copy of the image file, then there are several options available depending on whether the switch is still running normally or whether the switch has attempted to boot and has an error.

If you do not have a back up copy of the image file then you need to down load the image from the software center on the Cisco web site (which requires a login with software download capability).

If you have a back up copy or have loaded a copy from Cisco and the switch is still running normally then you would use TFTP to copy the image into switch flash. If the switch is not running normally then you probably need to use xmodem which is discussed in the link provided by Mahmood.

HTH

Rick

145
Views
0
Helpful
2
Replies