L3SWPPCL#copy flash:c3750-ipservices-mz.122-35.SE5.bin tftp: Address or name of remote host ? 10.128.193.99 Destination filename [c3750-ipservices-mz.122-35.SE5.bin]? %Error opening flash:c3750-ipservices-mz.122-35.SE5.bin (No such file or directory)
Sorry but the output is not clear, do you mean that the file you have in flash is "dir flash:c3750-ipservices-mz.122-35.SE5"? Without the .bin at the end?
If that's the case then try to "copy flash:c3750-ipservices-mz.122-35.SE5 tftp://"
IOS filename extension are not important, the file name could be c3750-ipservices-mz.122-35.SE5 without the ".bin" and still be valid.
If you look at "show ver" you'll have an indication of the filename the device used to boot at the "System image file is " line. If you used that 122-35.SE5 image you try to copy to boot this device you'll see the full path and image name.
On my tftp server, I keep the most current (IOS in production) copy of IOS named as C3750.tar. But you can name the file anything that you desire.
Example being performed on an acual switch:
106-TC2D-3750-1#archive upload-sw tftp://10.0.0.1/c3750.tar ! System software to be uploaded: System Type: 0x00000002 System Type: 0x00000000! archiving c3750e-universalk9-mz.122-52.SE (directory) archiving c3750e-universalk9-mz.122-52.SE/c3750e-universalk9-mz.122-52.SE.bin (13425020 bytes)!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...