Flex WAN WS-X6182-2PA in 6509 w/ WS-SUP720-3B-(2) Bridge-group?

james_d · ‎10-09-2006

We recently moved to redundant sup720-3b's and we kept our Flex WAN WS6182-2pa in service. We are trying to support lat over a serial interface. in the old IOS we used Bridge-group on the serial interface, in the new IOS 12.2(18)SXF4 it isn't available. How can we reinitialize bridging on serial with vlan?

ivillegas · ‎10-13-2006

try the "bridge-domain" command instead of the "bridge-group" command.

james_d · ‎10-16-2006

I have a T1 connection on one of the Flex WAN ports and using bridge-domain asks for trunking protocol choices. I am doing vlan-bridging to transport some LAT we are still using and up until we upgraded our Sups and IOS we were using Bridge-goup on the Flex WAN port interface which is connecting wan via a T1. Is there any other way to do this or ?