Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Flex WAN WS-X6182-2PA in 6509 w/ WS-SUP720-3B-(2) Bridge-group?

We recently moved to redundant sup720-3b's and we kept our Flex WAN WS6182-2pa in service. We are trying to support lat over a serial interface. in the old IOS we used Bridge-group on the serial interface, in the new IOS 12.2(18)SXF4 it isn't available. How can we reinitialize bridging on serial with vlan?

2 REPLIES
Silver

Re: Flex WAN WS-X6182-2PA in 6509 w/ WS-SUP720-3B-(2) Bridge-gro

try the "bridge-domain" command instead of the "bridge-group" command.

New Member

Re: Flex WAN WS-X6182-2PA in 6509 w/ WS-SUP720-3B-(2) Bridge-gro

I have a T1 connection on one of the Flex WAN ports and using bridge-domain asks for trunking protocol choices. I am doing vlan-bridging to transport some LAT we are still using and up until we upgraded our Sups and IOS we were using Bridge-goup on the Flex WAN port interface which is connecting wan via a T1. Is there any other way to do this or ?

511
Views
0
Helpful
2
Replies