Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k

Flexible Netflow for ASR 1001

I have an ASR 1001 router.  I have enabled flexible netflow with the following commands below

flow record AAAA

match interface input

match interface output

flow exporter BBBBB

destination 10.10.89.71 vrf Mgmt-Intf   ---->this is the Ip address of my Orion neflow server

source GigabitEthernet0

transport udp 2055 ---> My netflow server listens on 2055.  by default this was 90

flow monitor FFFFF

record AAAA

exporter BBBBB

INTERFACE G0/0/2

ip flow monitor FFFFF

One thing that I found interestesting was enable cef on the router was not the nortmal ip cef in global configuration mode.

The command i used was ip cef account non-recursive.

Any suggestions.

When I use the ip flow export my counters are set to 0

261
Views
0
Helpful
0
Replies
CreatePlease to create content