Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Flexible Netflow Issue

    HI ALL

Dears

please i can't run the configuration of Flexible Netflow on my switch , the comands are not availabe !!!

please help

Notice / find the following table my switch model and software

Switch Ports Model              SW Version            SW Image             

------ ----- -----              ----------            ----------           

*    1 30    WS-C3750X-24       12.2(55)SE5          C3750E-UNIVERSALK9-M

Model number                    : WS-C3750X-24T-E

PLEASE I NEED NETFLOW HELP ME TO RUN ON MY SWITCH

17 REPLIES
Purple

Flexible Netflow Issue

Hi,

http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3750x_3560x/software/release/15-0_1_se/configuration/guide/3750xcg/swmnetflow.html

"Flexible  NetFlow is supported only on the Catalyst 3750-X and 3560-X switch  running the IP base or IP services feature set and equipped with the  network services module. It is not supported on switches running the NPE  or the LAN base image. "

Regards

Alain

Don't forget to rate helpful posts.

Don't forget to rate helpful posts.
New Member

Flexible Netflow Issue

HI Cadet

Dear my Switch model is 3750x , and running this image software "License Level: ipservices".... thats why ask this question ! because my switch has the capablity of running the Netflow but the commands are not available !

New Member

Flexible Netflow Issue

..and equipped with the network services module

New Member

Flexible Netflow Issue

Dear Jay

please what do u mean ? i dont understand !

New Member

Flexible Netflow Issue

cadet alain wrote:

Hi,

http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3750x_3560x/software/release/15-0_1_se/configuration/guide/3750xcg/swmnetflow.html

"Flexible  NetFlow is supported only on the Catalyst 3750-X and 3560-X switch  running the IP base or IP services feature set and equipped with the  network services module. It is not supported on switches running the NPE  or the LAN base image. "

Regards

Alain

Don't forget to rate helpful posts.


See Cadet's post above..

New Member

Flexible Netflow Issue

Dear Jay

My switch is running IP services feature.

License Level: ipservices

New Member

Re: Flexible Netflow Issue

Ok... AND it needs to be equipped with the network services module

Sent from Cisco Technical Support iPhone App

New Member

Flexible Netflow Issue

HI Jay

please i dont understand  need to equipped what ? who can equipped it ?

please Clarify it to me , to get full Rate

New Member

Flexible Netflow Issue

Jay Brown wrote:

cadet alain wrote:

Hi,

http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3750x_3560x/software/release/15-0_1_se/configuration/guide/3750xcg/swmnetflow.html

"Flexible  NetFlow is supported only on the Catalyst 3750-X and 3560-X switch  running the IP base or IP services feature set and equipped with the  network services module. It is not supported on switches running the NPE  or the LAN base image. "

Regards

Alain

Don't forget to rate helpful posts.


See Cadet's post above..

You need 2 things to get Netflow to work on a 3750 -

1- IP Base or IP Services

2- Network Services Module - for example: C3KX-SM-10G Service Module..  Please research for the specific C3KX module for your particular switch

New Member

Flexible Netflow Issue

HI Jay

Dear Both of them are obtainable in my switch ( that is why i am asking for )

my switch license level is IP Services , and C3KX-SM-10G module  is exist in my switch ! .

but when i want to run the commands (flow record) , those commands are not available ! 

New Member

Flexible Netflow Issue

Can you run SH VER and post that for us?

New Member

Flexible Netflow Issue

Dear Jay

please find the below sh ver output:

sh ver

Cisco IOS Software, C3750E Software (C3750E-UNIVERSALK9-M), Version 12.2(55)SE5, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2012 by Cisco Systems, Inc.

Compiled Thu 09-Feb-12 18:14 by prod_rel_team

Image text-base: 0x00003000, data-base: 0x02800000

ROM: Bootstrap program is C3750E boot loader

BOOTLDR:

It uptime is 10 weeks, 4 days, 15 hours, 4 minutes

System returned to ROM by power-on

System restarted at 14:51:37 UTC Sun Dec 8 2013

System image file is "flash:c3750e-universalk9-mz.122-55.SE5.bin"

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to

export@cisco.com.

License Level: ipservices

License Type: Permanent

Next reload license Level: ipservices

cisco WS-C3750X-24 (PowerPC405) processor (revision A0) with 262144K bytes of memory.

Processor board ID FDO1701W1GR

Last reset from power-on

1 Virtual Ethernet interface

1 FastEthernet interface

28 Gigabit Ethernet interfaces

2 Ten Gigabit Ethernet interfaces

The password-recovery mechanism is enabled.

512K bytes of flash-simulated non-volatile configuration memory.

Model revision number           : A0

Motherboard revision number     : A0

Model number                    : WS-C3750X-24T-E

Daughterboard assembly number   : 800-32727-03

Top Assembly Part Number        : 800-31327-07

Top Assembly Revision Number    : B0

Version ID                      : V04

CLEI Code Number                : COMJV00ARD

Hardware Board Revision Number  : 0x04

Switch Ports Model              SW Version            SW Image                

------ ----- -----              ----------            ----------              

*    1 30    WS-C3750X-24       12.2(55)SE5           C3750E-UNIVERSALK9-M    

New Member

Flexible Netflow Issue

New Member

Flexible Netflow Issue

So my IOS version is not support Flexible Netflow ?

i should upgrade to ver 15 ?

New Member

Flexible Netflow Issue

I would set it up in a lab and test it first, if possible.

Sounds like you have the correct Network Service Module and license.

Bronze

Flexible Netflow Issue

What sort of error is thrown when you type in Flexible NetFlow commands? Or does it not even accept the FNF commands?

Regards,
Don Jacob


NOTE: Please rate and close questions if you found any of the answers helpful.

Regards, Don Thomas Jacob http://www.solarwinds.com/netflow-traffic-analyzer.aspx Head Geek @ SolarWinds NOTE: Please rate and close questions if you found any of the answers helpful.
Bronze

Flexible Netflow Issue

Rechecked. You will need a newer IOS version is what it looks like.

The minimal Cisco IOS Software release for the service module is 15.0(1)SE

. Older Cisco IOS Software revisions will not recognize the service module.

Source:

http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-3750-x-series-switches/white_paper_c11-691508.html

Regards,
Don Jacob

NOTE: Please rate and close questions if you found any of the answers helpful.

Regards, Don Thomas Jacob http://www.solarwinds.com/netflow-traffic-analyzer.aspx Head Geek @ SolarWinds NOTE: Please rate and close questions if you found any of the answers helpful.
344
Views
33
Helpful
17
Replies