Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Flexible netflow problem on ASR 1001

We have configured following flexible netflow on our ASR router

flow monitor FLOW-MONITOR-1

cache entries 1024

record netflow ipv4 original-output

WAN Interface

ip flow monitor FLOW-MONITOR-1 output

However we are not able to get our required show related command like below

BUR-ASR01-L2-L3# show flow monitor FLOW-MONITOR-1 ca

BUR-ASR01-L2-L3# show flow monitor FLOW-MONITOR-1 cache ?

format Specify cache display format

| Output modifiers


NOTE: In document there are other options like filter, aggregation and sort options but in our ASR we are not seeing them.

Following is the show version output for the configured ASR

Cisco IOS Software, IOS-XE Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 1

Technical Support:
Copyright (c) 1986-2012 by Cisco Systems, Inc.

Compiled Wed 15-Feb-12 21:55 by mcpre

Cisco IOS-XE software, Copyright (c) 2005-2012 by cisco Systems, Inc.

All rights reserved. Certain components of Cisco IOS-XE software are

licensed under the GNU General Public License ("GPL") Version 2.0. The

software code licensed under GPL Version 2.0 is free software that comes

with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such

GPL code under the terms of GPL Version 2.0. For more details, see the

documentation or "License Notice" file accompanying the IOS-XE software,

or the applicable URL provided on the flyer accompanying the IOS-XE



BUR-ASR01-L2-L3 uptime is 11 weeks, 6 days, 11 hours, 38 minutes

Uptime for this control processor is 11 weeks, 6 days, 11 hours, 39 minutes

System returned to ROM by reload at 04:54:16 ast Tue May 22 2012

System restarted at 12:57:59 ast Tue May 22 2012

System image file is "bootflash:/asr1001-universalk9.03.05.01.S.152-1.S1.bin"

Last reload reason: Reload Command

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

If you require further assistance please contact us by sending email to

License Info:

License UDI:

Device# PID SN UDI


*0 ASR1001 JAE15500814 ASR1001:JAE15500814

License Package Information for Module:'asr1001'

Module name Image level Pri Config Valid license


asr1001 adventerprise 1 NO adventerprise

advipservices 2 NO advipservices

ipbase 3 NO ipbase

Module name Current Level Reboot Level


asr1001 advipservices advipservices

cisco ASR1001 (1RU) processor with 1179685K/6147K bytes of memory.

4 Gigabit Ethernet interfaces

32768K bytes of non-volatile configuration memory.

4194304K bytes of physical memory.

7782399K bytes of eUSB flash at bootflash:.

Configuration register is 0x2102

Please advise.

Everyone's tags (5)
CreatePlease login to create content