Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

FlexWan module and SUP720

Is the flexwan module part number WS-X6182-2PA supported in WS-SUP720 BASE? or do I need to buy an enahanced FlexWan,?

2 REPLIES
New Member

Re: FlexWan module and SUP720

It is supported. You just need to make sure you have the right code on the 720.

Cisco Employee

Re: FlexWan module and SUP720

Nawas,

WS-X6182-2PA is supported on SUP720 and refer below some of the information that will come handy when you order the parts.

On SUP720, you need WAN Feature set Software to support the WS-X6182-2PA module. When you go to the download page, you can see the image filename that as "_wan" and these images should support WS-X6182-2PA.

And also, WS-X6182-2PA is End of Sale and already past Last Shipment Date of April 15, 2006. Please refer the below document for replacement parts:

http://www.cisco.com/en/US/products/hw/routers/ps368/prod_eol_notice0900aecd802e9c57.html

FLEXWAN :

http://www.cisco.com/en/US/products/hw/modules/ps2797/products_data_sheet09186a00800923bf.html#wp1002300

Let me know if it helps.

Regards,

Arul

** Please rate all helpful posts **

365
Views
5
Helpful
2
Replies
CreatePlease to create content