Hi Guys, just a quick question regarding flushing routes within OSPFv3. I'm really confused as to why the network 2001:DB8:0:20::/64 has only been removed from the routing table when the router has learned mutliple routes over its s0/2/0 interface. Bearing in mind that the 2001:DB8:0:20::/64 network is directly connected and all the others are dependent on this connection, surely these networks shown within the sh ipv6 route output would also be flushed?
RIPng flushes these routes when the s0/2/0 connection goes down. So does OSPFv3 not?
*Mar 19 21:44:00.787: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial 0/2/0, changed state to down
*Mar 19 21:44:00: IPv6RT0: connected, Delete 2001:DB8:0:20::1/128 from table
*Mar 19 21:44:00: IPv6RT0: connected, Delete 2001:DB8:0:20::/64 from table
*Mar 19 21:44:00: IPv6RT0: ospf 1, Backup call for 2001:DB8:0:20::/64
*Mar 19 21:44:00.791: %OSPFv3-5-ADJCHG: Process 1, Nbr 126.96.36.199 on Serial 0/2/0 from FULL to DOWN, Neighbor Down: Interface down or detached
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.