02-05-2014 04:22 AM - edited 03-07-2019 06:01 PM
Hi Team,
We are getting frequent logs in 6500 platform switch
%FM-6-FM_CONSISTENCY_CHECK_LOG_STATUS: Consistency Checker found inconsistency.
Consistency run details : Timestamp 2014-02-05@09:16:56. Log Id: 13082
Please use 'show platform feature-manager consistency-check log 13082'
to get details about the failed consistency checks.
Is this is an issue with the hardware or software please expertise this..
Regards,
Arun
02-05-2014 05:55 AM
Hi,
Feature manager consistency checker (FMCC) is bascially desinged to check in-consistency between software and hardware tables based on configs. Changes or interface events; by defaults it run every 30 min.
Can you use the command showing in the error: 'show platform feature-manager consistency-check log 13082' and post the output of that.
Regards,
02-09-2014 09:54 PM
Hi Leo,
We cannot find the exact consistency log id which is came in the show log, PFB
show platform feature-manager consistency-check log ?
<13310-13314> Log identifier
=====================================
CONSISTENCY CHECKER : ENABLED
remaining timer value: 1192 seconds
=====================================
Log Id 13310
Log Type Static Features
Timestamp 2014-02-10@03:18:08
Feature Manager auto-correct is currently enabled
-----------------------------------------
[1]: No inconsistencies found on this run.
S03#show platform feature-manager consistency-check log 13311
=====================================
CONSISTENCY CHECKER : ENABLED
remaining timer value: 1187 seconds
=====================================
Log Id 13311
Log Type Dynamic Features
Timestamp 2014-02-10@03:48:08
Feature Manager auto-correct is currently enabled
-----------------------------------------
[1]: No inconsistencies found on this run.
S03#show platform feature-manager consistency-check log 13312
=====================================
CONSISTENCY CHECKER : ENABLED
remaining timer value: 1184 seconds
=====================================
Log Id 13312
Log Type RBACL Feature
Timestamp 2014-02-10@04:18:09
Feature Manager auto-correct is currently enabled
-----------------------------------------
[1]: No inconsistencies found on this run.
S03#show platform feature-manager consistency-check log 13313
=====================================
CONSISTENCY CHECKER : ENABLED
remaining timer value: 1177 seconds
=====================================
Log Id 13313
Log Type Interface Default entries
Timestamp 2014-02-10@04:48:09
Feature Manager auto-correct is currently enabled
-----------------------------------------
[1]: No inconsistencies found on this run.
S03#show platform feature-manager consistency-check log 13314
=====================================
CONSISTENCY CHECKER : ENABLED
remaining timer value: 1174 seconds
=====================================
Log Id 13314
Log Type Interface Default entries
Timestamp 2014-02-10@05:18:09
Feature Manager auto-correct is currently enabled
-----------------------------------------
[1]: No inconsistencies found on this run.
02-10-2014 11:51 AM
Hi Arun,
Well, that is really odd, if the error does not show up again we can say that it was a transient issue, if appears again you may want to open a TAC case to investigate further.
Regards,
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: