%FM-6-FM_CONSISTENCY_CHECK_LOG_STATUS: Consistency Checker found
Feature manager consistency checker (FMCC) is bascially desinged to check in-consistency between software and hardware tables based on configs. Changes or interface events; by defaults it run every 30 min.
Can you use the command showing in the error: 'show platform feature-manager consistency-check log 13082' and post the output of that.
[toc:faq]The ProblemOn traditional switches whenever we have a trunk
interface we use the VLAN tag to demultiplex the VLANs. The switch needs
to determine which MAC Address table to look in for a forwarding
decision. To do this we require the switch to do...
[toc:faq]Introduction:Netdr is a tool available on a RSP720, Sup720 or
Sup32 that allows one to capture packets on the RP or SP inband. The
netdr command can be used to capture both Tx and Rx packets in the
software switching path. This is not a substitut...
IntroductionOSPF, being a link-state protocol, allows for every router
in the network to know of every link and OSPF speaker in the entire
network. From this picture each router independently runs the Shortest
Path First (SPF) algorithm to determine the b...