We currently have a Frame relay Network comprised of 80 plus sites running EIGRP. We will be migrating to an MPLS network soon using Juniper Routers. Are there any recommendations on how best to accomplish this??? Any help would be greatly appreciated.
Since the MPLS network will be using BGP would it be better to enable OSPF on the Cisco Frame routers along side EIGRP and then do some redistribution or would it be better to use static routes?? Is there a best practice design for this scenerio???
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...