Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

frame-relay traffic shaping

i was try to configure the traffic-shaping in cisco 7609 router is not picking it but 2600 and 2800 routers it's working fine and the 7609 router ios version is 12.2(18),here is what i was trying to do

interface Serial1/0/1

bandwidth 256

no ip address

encapsulation frame-relay

ip route-cache flow

no keepalive

frame-relay traffic-shaping

frame-relay lmi-type cisco

7 REPLIES
Hall of Fame Super Bronze

Re: frame-relay traffic shaping

Let's see the output from typing show frame traffic-shaping

__

Edison.

New Member

Re: frame-relay traffic shaping

Router#sh frame traffic

Frame Relay statistics:

ARP requests sent 0, ARP replies sent 0

ARP request recvd 0, ARP replies recvd 0

there is no option for show frame traffic-shaping it's only (show frame traffic

Hall of Fame Super Bronze

Re: frame-relay traffic shaping

Sorry, the correct command is show traffic-shape

__

Edison.

New Member

Re: frame-relay traffic shaping

ok i did show traffic-shape but no output

Router#sh traffic-shape

Router#

Hall of Fame Super Bronze

Re: frame-relay traffic shaping

Please post the show version and show module output.

__

Edison.

New Member

Re: frame-relay traffic shaping

Find attached the output of show version and the show module

Hall of Fame Super Bronze

Re: frame-relay traffic shaping

FRTS is not supported under the Enhanced FlexWAN module.

Please refer to its datasheet, under "Unsupported Features"

http://www.cisco.com/en/US/products/hw/modules/ps2797/products_data_sheet09186a00801df1d9.html

HTH,

__

Edison.

138
Views
5
Helpful
7
Replies
CreatePlease to create content