Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

frame-relay

R1-----R5-----R3,R5 is frame-relay switch ,. R1 can not communite with R3, what is the wrong ,please ?

R5

interface Serial1/0    ###### to R1
no ip address
encapsulation frame-relay
serial restart-delay 0
frame-relay lmi-type cisco
frame-relay intf-type dce
frame-relay route 231 interface Serial1/1 233
!
interface Serial1/1     #### to R3
no ip address
encapsulation frame-relay
serial restart-delay 0
frame-relay lmi-type cisco
frame-relay intf-type dce
frame-relay route 233 interface Serial1/0 231

R1

interface Serial1/0
ip address 1.1.1.1 255.255.255.0
encapsulation frame-relay
serial restart-delay 0

R3

interface Serial1/1
ip address 1.1.1.2 255.255.255.0
encapsulation frame-relay
serial restart-delay 0

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

Re: frame-relay

Hello Zhiwei,

on DTE routers try to use point-to-point subinterfaces and to use frame-relay interface-dlci to see if the issue is related to inverse-ARP

Hope to help

Giuseppe

2 REPLIES
Hall of Fame Super Silver

Re: frame-relay

Hello Zhiwei,

on DTE routers try to use point-to-point subinterfaces and to use frame-relay interface-dlci to see if the issue is related to inverse-ARP

Hope to help

Giuseppe

548
Views
0
Helpful
2
Replies