I have experienced this immediately after configuring archive commands on a router. The archive configuration I used, writes the configuration to the router's flash whenever I run a "write" command. I received exactly the same error message. The only remedy that I found was to reboot the router. I expect that it's a bug in the IOS. I believe that it occurred with both c2800nm-spservicesk9-mz.124-24.T7.bin and c2800nm-spservicesk9-mz.124-24.T8.bin. As you see, I was using 2800 seriies routers.
We are pleased to announce availability of Beta software for 16.6.3.
16.6.3 will be the second rebuild on the 16.6 release train targeted
towards Catalyst 9500/9400/9300/3850/3650 switching platforms. We are
looking for early feedback from customers befor...
Introduction Featured Speakers Luis Espejel is the Telecommunications
Manager of IENova, an Oil & Gas company. Currently he works with Cisco
IOS® and Cisco IOS XE platforms, and NX to some extent. He has also
worked as a Senior Engineer with the Routing P...
In this session you can learn more about Layer 3 multicast and the best
practices to identify possible threats and take security measures. It
provides an overview of basic multicast, the best security practices for
use of this technology, and recommendati...