03-17-2009 11:20 AM - edited 03-06-2019 04:39 AM
Will a Gig fiber module work in a ten-gig slot?
03-17-2009 11:22 AM
You need to more specific, what hardware module are we dealing here?
__
Edison.
03-17-2009 11:38 AM
NAME: "Linecard(slot 1)", DESCR: "Supervisor 6-E 10GE (X2), 1000BaseX (SFP) with 2 10GE X2 ports"
PID: WS-X45-SUP6-E
03-17-2009 11:50 AM
Yes, it does. You can get the following modules:
⢠GLC-SX-MM: Gigabit Ethernet SFP, LC connector, SX transceiver
⢠GLC-LH-SM: Gigabit Ethernet SFP, LC connector, LX/LH transceiver
⢠GLC-ZX-SM: 1000BASE-ZX SFP
HTH,
__
Edison.
03-17-2009 12:11 PM
So a GLC-SX-MM works in a XENPAK slot?
03-17-2009 12:18 PM
Jason,
I provided a link, please read it! :)
The Cisco Catalyst Supervisor Engine 6-E also provides flexibility and an easy migration path to 10 Gigabit Ethernet uplinks with dual-purpose X2 slots that can accommodate wire-speed 10 Gigabit Ethernet optics or Cisco Twin Gigabit Converter modules (Figure 2), enabling Gigabit Ethernet SFP optics.
__
Edison.
03-17-2009 12:38 PM
What is the part number for the Cisco Twin Gigabit Converter that allows me to plug the WS-G5486 into the XENPAK slot?
03-17-2009 12:42 PM
Jason,
Please read the link.
03-17-2009 12:45 PM
I can't find the Twin Converter part number on the link.
03-17-2009 03:21 PM
CVR-X2-SFP: Twin gigabit converter module
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide