Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

GigabitEthernet ports on 7609 router

Here's the configuration:

interface GigabitEthernet1/23

description test

switchport

switchport access vlan 140

switchport mode access

switchport nonegotiate

speed 1000

duplex full

no cdp enable

spanning-tree portfast

The cable is straight and in good condition. I noticed when I inserted the cable to this port, the LED lid on that specific port turn to OFF. As checked the interface status, its down / down. I tried to shut and no shut but I got the same result.

Is there any way to check the integrity of that specific port? Thanks.

2 REPLIES
Silver

Re: GigabitEthernet ports on 7609 router

Depending on the module(s) you have installed and the IOS version you're running, you can try this link:

http://www.cisco.com/en/US/docs/routers/7600/ios/12.2SXF/configuration/guide/intrface.html#wp1066783

HTH

Steve

Re: GigabitEthernet ports on 7609 router

hi

did u try checking up the logs ?

if not do check up when you are trying this.

That mite provide some clue on the possible reason behind this behavior.

regds

97
Views
0
Helpful
2
Replies