Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Cisco Support Community site will be in read only mode on Dec14, 2017 from 12:01am PST to 11:30am for standard maintenance. Sorry for the inconvenience.

New Member

GigabitEthernet0/2 is down, line protocol is down (notconnect)

how to bring back this interface to up status

GigabitEthernet0/2 is down, line protocol is down (notconnect)

3 REPLIES

Re: GigabitEthernet0/2 is down, line protocol is down (notconnec

Connect it something like a switch or PC.

New Member

Re: GigabitEthernet0/2 is down, line protocol is down (notconnec

what are the other combinations

GigabitEthernet0/2 is down, line protocol is down (notconnect)

GigabitEthernet0/2 is admin down, line protocol is down (diabled)

GigabitEthernet0/2 is down, line protocol is up

GigabitEthernet0/2 is up, line protocol is down

New Member

Re: GigabitEthernet0/2 is down, line protocol is down (notconnec

1st Combination is when Interface is down

as mentioned you can bring it up by connecting to PC

Second combination is when interface is administrative shutdown using shut command on interface

third option should Interafe is up and line protocol is up

4th combination when line protocol is down

it could be due to keepalive, not matching encapsulation or clockrate

rate if it helps

19015
Views
4
Helpful
3
Replies
CreatePlease to create content