Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Gigastack Tracking

Hi all,

We have a group of 8 3500XL switches connected to each other via gigastack modules. When I input "show cdp nei" on one of the switch, it shows that all gigastack switches connect to the same port.

What do I need to do to distinguish what is connecting to what directly without physical inspection?

Please help! Thanks.

4 REPLIES
Purple

Re: Gigastack Tracking

Not sure their is a way and one of the reasons I don't like stacking along with the difficulties finding mac addresses in a large stack.

New Member

Re: Gigastack Tracking

Anyone else has the same issue?

Re: Gigastack Tracking

Hi,

Show cdp nei details should show you details, 1Gig FD port will split into 2 links ( 1G half Duplex to 1 switch and further 1G half to the next). But I suggest you install Cisco Network Assistant, this will help you to set/see trunks using a GUI interface.

http://www.cisco.com/en/US/products/ps5931/index.html

HTH

Shaheen

New Member

Re: Gigastack Tracking

It does not work. Sh cdp nei det is still showing one Gigastack port connecting to all 8 switches.

144
Views
0
Helpful
4
Replies