Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

glbp configuration

scenario;

-2x6500 with fwsm on each

-msfc with user vlans 12,13 running glbp

-no trunk connections between the 2x6500

-user edge switch having trunk connections to both of the core

CORE CONFIG

CORE 1

int vlan 101

ip address 192.168.101.1 255.255.255.0

glbp 101 ip 192.168.101.254

glbp 101 priority 110

CORE 2

int vlan 101

ip address 192.168.101.2 255.255.255.0

glbp 101 ip 192.168.101.254

glbp 101 priority 105

QUESTION;

-why if i removed 1 one of the uplink on the edge, my connection get lost and will never come back.

2 REPLIES
New Member

Re: glbp configuration

You say you have glbp running on vlans 12,13. Where is that configuration?

The config is only showing GLBP for VLAN 101 on the core.

Regards,

Jason

New Member

Re: glbp configuration

sorry. it is same as the vlan 101 config.

129
Views
0
Helpful
2
Replies
CreatePlease login to create content