Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

glbp

Hi,

We have glbp running in our network.I need to check if loadbalancing if indeed happening with this.I can see round robin happening.But how to see it in real based on some other parameters ,How can we check this?

2)Is there any other thing that can be configured to further make this more effecient?

3)the track feature is being used with some route tracking to some ip network inside providers network possibly.

Can better tracking be configured using other parameters, which would give better & fast switchover?

Current configuration is as below:

track 5 ip route 63.42.56.0 255.255.255.224 reachability

glbp 5 ip 192.168.100.3

glbp 5 preempt

glbp 5 weighting 100 lower 95

glbp 5 weighting track 1 decrement 10

glbp 5 forwarder preempt delay minimum 0

Thanks.

1 REPLY

Re: glbp

For fast convergence you can adapt the timers.

standby 5 timers msec 300 1

By default the hello interval is 3 seconds and the holdtime 10 seconds. Above it's changed to 300msec - 1 second (hello - holdtime)

128
Views
0
Helpful
1
Replies