I need some help understanding a problem I have. I have to networks connected over GRE using Cisco 1921 routers. One router is connected to the Internet and the other one to a 4G provider. 4G as I know it should be slower on the upload than on the download but for my users at the remote site it's the opposite. I get speeds around 4mbit down and 12mbit up. If I send the remote site straight out to Internet and skip the tunnel I get speeds around 10mbit down and 5mbit up.
I've been trying some MTU and MSS settings but none has given any clear improvements. Anyone got an idea?
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...