IOS (tm) C2600 Software (C2600-JK9S-M), Version 12.2(13)T, RELEASE SOFTWARE (fc1).
cisco 2650XM (MPC860P) processor (revision 0x100) with 61440K/4096K bytes of memory.
I have accidently deleted all the files from flash apart from the IOS itself. Can someone please tell me how to go about finding all the required files for the GUI for this router and IOS version? Thanks
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...