Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Guide me for Subnet

I am using 192.168.1.0/24 network for my one of the site

now i my all 254 host has been used.

i am out of ip address

can i use

192.168.0.0/23 subnet

so that my first host ip will be 192.168.0.1/23

pls advise me

may this is silly question but i hev some doubt

2 REPLIES

Re: Guide me for Subnet

Jitendra,

There is no silly question here. (grin)

Yes, you can use 192.168.0.0/23.

Technically speaking, you may be concerned about a broadcast domain as well.

HTH,

Toshi

New Member

Re: Guide me for Subnet

If you do this just remember you will need to change any each individual computer to get the correct subnet mask. If using dhcp server this task may be a little less time consuming as you can change it there and then reboot or release / renew each pc rather than statically change them.

119
Views
0
Helpful
2
Replies
CreatePlease to create content