Health Check Report for cisco 4500-x, 3560-x, 2960-x

[Abdul Azeem]

Dear All,

Can anyone help me out in preparing a Health Check Report for the above mentioned Cisco switches.

your quick response will be appreciated...

As i have to submit it by today, the main points what they need is Bandwidth utilization on the interfaces, overall functionality of the switches.

Errors if any.

Awaiting your usual support and quick response........

[Naveen Venkateshaiah]

Hi,

Collect show tech support from these above switches, and look for below outputs.

show ver

show module

show diagnostic result module all

show diagnostic events

show envrinoment

show power

sh interface interface-id status

sh interface interface-id counter error

show logs

and look for the below link to further prepare a health check report.

http://www.cisco.com/c/en/us/support/docs/switches/catalyst-4500-series-switches/24052-165.html

hope it helps,

Regards,

Naveen

[Abdul Azeem]

Dear Naveen,

Thanks a lot for your response, i have already generated the output of the above commands.

Can you please send me a format to prepare a report.

So that a non technical guy can also understand it easily.

Awaiting you usual support and quick response....

[Abdul Azeem]

Dear All,

Can anyone send me a format of health check up report

[yusuf habibi]

hi, your Network Health Check report will contain:

1.  Network schematics (topology)
2.  Network switch statistics, errors and screen shots
3.  Wireless access point signal strength, coverage, interference, congestion and  performance
4.  File server performance, utilisation, error logs