Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

health Check Using Network Assistant

hi,

I usually use Cisco Network Assistant to check and perfom configuration for my 2950 / 2970 switches.

I Need to check my switches healthes, so i went to the monitoring options and i see bandwidth graph, CPU, Memory, Utilization.

Is there any average % for any of these.

For example if the Utilization is shown in the graph to be 35 % is this good or bad ?

Thanks in advance.

2 REPLIES
Bronze

Re: health Check Using Network Assistant

There is no any average % for bandwidth graph, CPU, Memory, Utilization. It will differ by using traffic as well as network utilization.

http://www.cisco.com/en/US/customer/docs/net_mgmt/cisco_network_assistant/version3_0/release/notes/OL8231.html

Community Member

Re: health Check Using Network Assistant

Hi,

Thanks for your reply.

But once i click on the above link, i recieve file forbidden page !

582
Views
0
Helpful
2
Replies
CreatePlease to create content