We have a 3750 switch and can't enter rommon. The password recovery functionality is enabled, and we tried connecting with hyperterminal on both a Dell Inspiron laptop and also tried a Dell 2970 running Windows Server 2003.
After bootup starts, we tried Control + C, Control + Break and tried the Break key by itself, but the switch continues to boot into the OS.
Any suggestions here as to what we might be overlooking?
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...