Help with DMZ on 831 Router

[Beagle0804]

I've been trying to get a DMZ set up on an 831 router so that I can get all my internet traffic behind the 831. I've drawn my network as it stands today and also how I would like it to look. But after pouring through online manuals and playing with the Cisco SDM, I can't get this figured out. Hopefully someone can help out a Cisco newbie like me.

Thanks,

Mark

(hoping my drawings get attached properly...)

[spremkumar]

Hi

hope this helps..

http://www.cisco.com/en/US/products/sw/iosswrel/ps5413/products_feature_guide09186a0080235e23.html

regds

[Beagle0804]

This helps to at least get the interface up and have it show in Cisco SDM as the DMZ interface. I completely understand getting traffic to the DMZ using PAT to the various servers.

Currently, my 3 servers each have their own static IP. I'd rather not mess with my DNS settings and I do have 2 of the servers handling separate WWW traffic on port 80. Can I have the 831 setup to pass the static public IP's through completely to the DMZ without looking at what ports are being used?