I am connecting cisco 2960 series(WS-C2960-48PST-L)switch and planet switch via sfp port , the link in not up and also orange light is not blinking in the switch , i am using cisco module(GLC-SX-MMD ) in cisco side and planet module in the planet end.
NO lights indicates to me a layer 1 issue. Like Devils said above try swapping the send/recieave around. As long as you have both ends configured correctly it should matter if cisco "recognises" the sfp or not.
are the switches in the same room, IE, are you using a patch cable or are they in a different location? Either way, If it's a patch cable you can seperate the ends from that clip that binds them together then swap them around. If it's fiber from another location you can swap the end around in the distribution block.
both switches are in the same room but different rack,we are using 6 cisco switches as a edge switch and palnet as core switch,in the server room there is one cisco and the core switch planet.there is SC fiber organiser in the rack , we alredy buy sc to lc fiber patch code for connecting sfp to organiser.so we are trying to connect first the core switch and cisco switch in the server room.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.