Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

High CPU in 4500

I see verfy high cpu utilization on my 4507 switch

The sh proc cpu shows the catmgmt -lo priority process with high utilization

the show platform health shows high utilization for the KxAclPathMan create/ process

after reading the troubleshooting guide it points to see whether there are any interface flaps but i do not see any

Any inputs will help

SUPV

IOS - 12.1 20 EW2

Ambi

1 ACCEPTED SOLUTION

Accepted Solutions

Re: High CPU in 4500

Have you enabled looging even link-status under your interfaces?

4500 does not show any interface flaps if the above command has been configured

HTH

Narayan

2 REPLIES
Purple

Re: High CPU in 4500

Maybe this can point you in the correct direction . If not check the bug toolkit.

http://www.cisco.com/en/US/products/hw/switches/ps663/products_tech_note09186a00804cef15.shtml

Re: High CPU in 4500

Have you enabled looging even link-status under your interfaces?

4500 does not show any interface flaps if the above command has been configured

HTH

Narayan

195
Views
0
Helpful
2
Replies
CreatePlease login to create content