Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

High CPU Load! Help!

Cisco 2851

#sh processes cpu sorted 5min

CPU utilization for five seconds: 98%/6%; one minute: 98%; five minutes: 98%

PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process

291 3560472 1091595 3261 87.94% 89.21% 89.47% 0 CCSIP_UDP_SOCKET

CCSIP_UDP_SOCKET causes high CPU Usage

Symptom Incoming and outgoing calls fail due to high CPU Usage.

Conditions CPU Usage is at 99-100% and CCSIP_UDP_SOCKET is using 88+%.

Workaround There is no workaround.

What can i do to solve the problem?

3 REPLIES
Hall of Fame Super Silver

Re: High CPU Load! Help!

Valery

What you are quoting sounds like there is a problem in the version of code that you are running. Perhaps it is time to think about an upgrade of the code that you are running (or perhaps a down grade, depending on what you are running).

HTH

Rick

New Member

Re: High CPU Load! Help!

Now running c2800nm-adventerprisek9_ivs-mz.124-15.T4.bin

Which version more stable?

Hall of Fame Super Silver

Re: High CPU Load! Help!

Valery

I see in the software download center that there is a slightly newer version of the code - 12.4(15)T5. Or if you want to go down a bit you might try 12.4(9)T7. Do you need the T train code for some feature or some hardware? If not then you might try 12.4(19) in main line code.

HTH

Rick

828
Views
0
Helpful
3
Replies