cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2565
Views
0
Helpful
2
Replies

High CPU Usage on 4507

kevinhum122
Level 1
Level 1

There is abnormal usage of CPU on the new core switch 4507, the details as below, anyone who can help me ?

I found the process "iosd" occupies around half hundred percent of CPU usage.

Core_WS-C4507#sh proc cpu sorted

Core 0: CPU utilization for five seconds: 8%; one minute: 12%;  five minutes: 39%

Core 1: CPU utilization for five seconds: 98%; one minute: 93%;  five minutes: 66%

PID    Runtime(ms) Invoked  uSecs  5Sec     1Min     5Min     TTY   Process

8518   2177349     27874427 485    52.92    52.77    52.74    0     iosd          

1 Accepted Solution

Accepted Solutions

Jose Solano
Level 4
Level 4

Hi,

This issue may be related to traffic being punt to the CPU for processing, below is a very useful link to troubleshoot this problem:

http://www.cisco.com/en/US/products/hw/switches/ps663/products_tech_note09186a00804cef15.shtml

Hope this helps.

View solution in original post

2 Replies 2

Jose Solano
Level 4
Level 4

Hi,

This issue may be related to traffic being punt to the CPU for processing, below is a very useful link to troubleshoot this problem:

http://www.cisco.com/en/US/products/hw/switches/ps663/products_tech_note09186a00804cef15.shtml

Hope this helps.

kevinhum122
Level 1
Level 1

Thanks Leo's assistance, sure, In the last,the issue happens thanks to the traffice flapping from WLC two ports, after port-channel made, the issue is completed, thanks Cisco Forum nice supporting, it really impresses me badly.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: