Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

High cpu utilization CAT 4000 L3 Switch

Hi I have an unusual behavior on Catalyst 4000 L3. The cpu utilization is 99%

The process K2FibAdjMan Host Mov is consuming HIgh ressources....

Does anyone have any suggestion?

Thnaks a lot

Switch#show platform health

%CPU %CPU RunTimeMax Priority Average %CPU Total

Target Actual Target Actual Fg Bg 5Sec Min Hour CPU

Lj-poll 1.00 0.02 2 1 100 500 0 0 0 1:09

GalChassisVp-review 3.00 0.29 10 3 100 500 0 0 0 11:15

S2w-JobEventSchedule 10.00 0.32 10 7 100 500 0 0 0 10:14

!--- Output suppressed.

K2FibAdjMan Stats Re 2.00 0.30 10 4 100 500 0 0 0 6:21

K2FibAdjMan Host Mov 2.00 18.68 10 4 100 500 25 29 28 2134:39

K2FibAdjMan Adj Chan 2.00 0.00 10 0 100 500 0 0 0 0:00

K2FibMulticast Signa 2.00 0.01 10 2 100 500 0 0 0 2:04

K2FibMulticast Entry 2.00 0.00 10 7 100 500 0 0 0 0:00

Cisco Internetwork Operating System Software

IOS (tm) Catalyst 4000 L3 Switch Software (cat4000-I5K2S-M), Version 12.1(20)EW

, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2005 by cisco Systems, Inc.

Compiled Tue 23-Aug-05 18:02 by kesnyder

Image text-base: 0x00000000, data-base: 0x0106BBD0

ROM: 12.2(20r)EW1

Dagobah Revision 226, Swamp Revision 32

es-pdmcoreedif7 uptime is 19 hours, 22 minutes

System returned to ROM by reload

System restarted at 19:13:38 CCS Wed Apr 1 2009

System image file is "bootflash:/cat4000-i5k2s-mz.121-20.EW4.bin"

1 REPLY
Hall of Fame Super Silver

Re: High cpu utilization CAT 4000 L3 Switch

Hello Leonardo,

use the following document about high cpu

http://www.cisco.com/en/US/products/hw/switches/ps663/products_tech_note09186a00804cef15.shtml#identify

K2FibAdjMan Host Mov this makes me think of mac address moves / flapping do you see any messages about mac flapping on the log ?

if so a bridging loop can be occurring

Hope to help

Giuseppe

559
Views
0
Helpful
1
Replies